Japanese


STEP 3

[3.5KB]
09

Sawdust has put all over.(09)

Put the mark of up and down, right and left at the surface of joints.(10)

 [2.4KB]
10
[2.7KB]
11

Modeling

 Knead the same quantities of sawdust and stoneclay.(12)

[2.1KB]
12



For the first put the mixed base uniformly, and put the mark for modeling.(11)
Don't use fiber-tipped pens, because ink would influence the surface later.
Colored pencils or conté crayons are suitable.
[5.2KB]
13		 [2.1KB]
14


(13) & (14) show the state of being fleshed out roughly.

After the shape of the head has decided, make the neck by the same way of the other parts. (Use the styrofoam inside for the core.)




[2.8KB]
15

The base of hands

 Draw the picture of a hand, and make palms with sawdust.
Cut stainless steel into ten pieces for fingers.(15)

[2.0KB]
16		 Make holes for fingers, four on the top of the palm and one inside the palm with a pinvise (tiny drill:16).

[2.7KB]
17
[1.5KB]
18



Put epoxy resin (18) at the top of steels and fix into the holes.(17)

[1.8KB]
19
After fixed firmly, cut the steels into adequate length and bend them into favorite pose.(19)
*STEP 4

*Top *How to Make INDEX